Toro Greensmaster eFlex 1800 Service Manual page 176

Removing the Lithium Battery Pack (continued)
Electrical System: Service and Repairs
g202789
1. Lithium battery pack
2. Battery base
5. Pivot the battery base and battery pack until the locking holes in the base
and frame align (Figure
the holes to hold the battery base in the raised position.
g202790
1. Wire harness connector
6. Rotate the wire harness connector locking collar counterclockwise and
disconnect the connector from the battery pack
The weight of the battery pack is 24.5 kg (54 lb).
Support the battery pack to prevent it from falling and causing
personal injury.
7. Support the battery pack to prevent it from moving or falling.
Figure 123
eFlex 2120 Model 04046 (shown)
3. Bolt and flat washer (6 each)
4. Locking hole
123). Insert a screwdriver or other steel rod through
Figure 124
eFlex 2120 Model 04046 (shown)
2. Rotating locking collar
CAUTION
Page 5–76
3. Battery receptacle
(Figure 124).
Greensmaster ® eFlex 1800, 2100 and 2120
12189SL Rev E