Toro Greensmaster eFlex 1800 Service Manual page 203

Installing the Reel Clutch Cable (continued)
Greensmaster ® eFlex 1800, 2100 and 2120
12189SL Rev E
Also, check that the clutch teeth do not bottom out when the clutch is
engaged.
E. Secure the reel clutch cable to the transmission bracket with the cable tie.
3. Make final reel clutch cable adjustment at the traction lever assembly
139) as follows:
A. Loosen both top and bottom cable jam nuts at the shift mount bracket.
B. Pull down lightly on outer sheath of the clutch cable.
C. Rotate the bottom cable jam nut up on the cable threads until the bottom
lock washer just contacts the shift mount bracket.
D. While holding the bottom jam nut in place, tighten the top cable jam nut.
4. Install the console cover to the handle assembly.
5. Connect the battery pack; refer to
(page 6–3).
Connecting the Lithium Battery Pack
Page 6–13 Chassis and Controls: Service and Repairs
(Figure