Toro Greensmaster eFlex 1800 Service Manual page 181

Removing the Samsung Lithium Battery Pack (continued)
Installing the Samsung Lithium Battery Pack
Greensmaster ® eFlex 1800, 2100 and 2120
12189SL Rev E
g270042
1. Flange nut (4 each)
2. Bolt (4 each)
3. Washer (4 each)
The weight of the battery pack is 11 kg (24 lb).
Support the battery pack to prevent it from falling and causing
personal injury.
4. Remove the 4 bolts, washers and nuts that secures the battery to the mount
bracket.
5. Carefully remove the battery from the mount bracket and the machine.
Do not open the Samsung lithium battery pack. There are no
consumer serviceable parts on or in the battery pack. If you open
the battery pack, you will void the warranty. The battery pack is
protected by tamper-alerting devices.
1. Ensure that the battery pack is clean and free from dirt.
2. Carefully position the battery pack onto the mount bracket. The battery
connectors should be towards the mount bracket.
3. Secure the battery pack to the mount bracket with the 4 bolts, washers and
nuts.
4. Connect the positive battery cable, negative battery cable and interface
harness cable to the battery; refer to
5. Coat the battery terminal posts and cable connectors with the battery terminal
protector to prevent corrosion.
Figure 126
4. Battery
5. Mount bracket
CAUTION
IMPORTANT
Figure
Page 5–81
125.
Electrical System: Service and Repairs