Toro Greensmaster eFlex 1800 Service Manual page 276

Assembling the Idler Assembly (Counter Rotating Groomer Drive) (continued)
Belt Driven Groomer: Service and Repairs
g228309
1. Right drive plate assembly
2. Flange nut
4. Install idler gears to drive plate assembly
secure idler gears to 13.5 N∙m (120 in-lb).
5. Install extension spring to idler bracket and adjustment cam.
6. Fill groomer cover with approximately 142 g (5 fl oz) of Mobil XHP221 grease
(or equivalent). Install new gasket and then groomer cover assembly to
right drive plate; refer to
(page 8–7).
7. Check and adjust grooming reel height and mower height-of-cut settings.
8. When all adjustments have been completed, connect the battery pack; refer
to Connecting the Lithium Battery Pack (page
Figure 211
3. 43T idler gear/bearing
4. 47T idler gear/bearing
(Figure
Groomer Cover (Counter Rotating Groomer Drive)
Page 8–28
211); torque flange nuts that
8–3).
Greensmaster ® eFlex 1800, 2100 and 2120
12189SL Rev E