Toro Greensmaster eFlex 1800 Service Manual page 261

Installing the Grooming Reel (Forward Rotating Groomer Drive) (continued)
Greensmaster ® eFlex 1800, 2100 and 2120
12189SL Rev E
14. Secure right groomer arm assembly to drive plate with spring washer (item
12 in Figure 189) and locknut.
15. Center front roller to cutting unit and tighten bolts (item 10 in
to secure roller.
16. Install groomer drive belt (item 3 in
to right drive plate; refer to
Groomer Drive) (page
17. Check grooming reel height and mower height-of-cut settings. Adjust as
necessary.
18. Install cutting unit to the machine.
19. Lubricate groomer bearings; refer to
20. Connect the battery pack; refer to
(page 8–3).
Note: After greasing groomer bearings, operate groomer for 30 seconds,
stop machine, and wipe excess grease from groomer shaft and seals.
Figure 189) and groomer drive cover
Replacing the Groomer Belt (Forward Rotating
8–6).
Installation Instructions (page
Connecting the Lithium Battery Pack
Page 8–13
Figure
Belt Driven Groomer: Service and Repairs
189)
8–2).