Toro Greensmaster eFlex 1800 Service Manual page 212

Removing the Transport Wheel
Disassembling the Transport Wheel
Chassis and Controls: Service and Repairs
g200276
1. Wheel retaining lever
g200277
1. Wheel hex shaft
1. Park the machine on a level surface, turn the key switch to the O
and remove the key from the key switch.
2. Support the machine on the kickstand.
3. Pivot the wheel retaining lever away from the center of the wheel. Slide the
transport wheel off the wheel hex shaft.
1. Ensure that the tire is fully deflated before disassembly of wheel.
2. Remove the 3 bolts (item 1 in
shallow rim and hub, and remove the hub from the deep rim.
3. Inspect the hub bushing (item 11 in
worn or damaged.
4. Remove the 4 bolts (item 12 in
rim and shallow rim. Remove the shallow rim from the deep rim.
5. Separate the tire, tube, and deep rim.
Figure 147
Figure 148
Figure 146) and 3 lock washers from the
Figure
Figure 146) and 4 flange nuts from the deep
Page 6–22
FF
146). Replace the bushing, if
Greensmaster ® eFlex 1800, 2100 and 2120
12189SL Rev E
position,