Toro Greensmaster eFlex 1800 Service Manual page 201

Removing the Reel Clutch Cable
Greensmaster ® eFlex 1800, 2100 and 2120
12189SL Rev E
1. Park the machine on a level surface, turn the key switch to the O
and remove the key from the key switch. Disconnect the battery pack; refer
to Connecting the Lithium Battery Pack (page
g198902
1. Transmission
2. Rubber plug
2. Remove the reel clutch cable from the transmission
A. Loosen the front cable jam nut and lift the cable free from the casting slot
of the transmission.
B. Remove the retaining ring that secures the cable eyelet to the reel clutch
lever and slide the cable eyelet from the lever.
C. Remove the cable tie that secures the reel drive cable to the transmission
bracket.
3. Remove the console cover from the handle assembly to get access to the
upper end of the reel clutch cable.
Figure 138
3. Reel clutch lever
4. Retaining ring
Page 6–11 Chassis and Controls: Service and Repairs
position,
FF
6–3).
5. Cable spring
6. Reel clutch cable
(Figure 138) as follows: