Toro Electronic Controller (TEC) (continued)
Greensmaster
®
eFlex 1800, 2100 and 2120
12189SL Rev E
(for Models 04042, 04043, 04046 and 04049 fitted with 04069) The TEC is
attached to the mount bracket inside the battery cover; refer to
Before performing any welding on the machine, do the following to
prevent damaging the electrical system of the machine:
•
Disconnect the machine connector from the lithium battery pack.
•
Disconnect the wire harness connectors from the Toro Electronic Controller.
IMPORTANT
Page 5–5
Figure
59.
Electrical System: General Information