Toro Greensmaster eFlex 1800 Service Manual page 32

Cutting Reel Shim
Toro Part No. 125–5611
Use the 0.05 mm (0.002 in) shim like a feeler gauge to
measure the gap between the reel and the bedknife during
reel adjustment.
Cutting Performance Paper
Toro Part No. 125–5610 (300 strips)
Cutting performance paper is used to test the cutting reel
performance after adjusting the reel to bedknife clearance.
Reel Drive Shaft
Toro Part No. TOR4112
Use the drive shaft for rotating the reel during cutting unit
adjustment or any time the hydraulic reel motor is removed.
Backlapping Brush Assembly
Toro Part No. 29–9100
For applying lapping compound to cutting units while keeping
hands a safe distance from the rotating reel.
Components for the brush assembly are also available
individually.
Brush 36-4310
Handle 29-9080
Handle cap 2410-18
Specifications and Maintenance: Special Tools Page 2–16 Greensmaster ® eFlex 1800, 2100 and 2120
12189SL Rev E