Toro Greensmaster eFlex 1800 Service Manual page 207

Assembling the Traction and Reel Drive Engagement Lever Assembly (continued)
Greensmaster ® eFlex 1800, 2100 and 2120
12189SL Rev E
4. Position the traction lever assembly (including lever assembly, shifter bracket,
shift mount, and switch mount bracket) to the handle. Secure the assembly in
place with the 4 flange-head screws (item 5 in
5. Connect the spring (item 4 in
and the operator presence control.
6. Connect the wire harness connectors to the traction and reel engage
switches (Figure 141).
7. Connect the reel clutch cable to the traction lever assembly; refer to
Replacing the Reel Clutch Cable (page
cable and adjust as necessary.
8. Check the adjustment of the traction and reel engage switches; refer to
Traction Switch (page 5–35)
the switches if necessary.
9. Install the console cover to the handle.
10. Connect the battery pack; refer to
(page 6–3).
Figure 141) between the traction lever assembly
6–10). Check the operation of the
and Reel Engage Switch (page
Connecting the Lithium Battery Pack
Page 6–17 Chassis and Controls: Service and Repairs
Figure 141) and 4 flange nuts.
5–37). Adjust