Toro Greensmaster eFlex 1800 Service Manual page 97

Assembling the Transmission Drum Drive System (continued)
Greensmaster ® eFlex 1800, 2100 and 2120
12189SL Rev E
E. Secure the transmission housing to the machine frame by tightening
the fasteners (items 7, 10, and 11 in
removed, ensure that the hardened washer is below the frame tube.
2. If removed, slide the wave washer (item 3 in
bearings into the extension housing.
3. Slide the shaft of the traction drum drive driven pulley (item 1 in
through the extension housing bearings and the spacer.
4. Apply the anti-seize lubricant to the pulley surface of the drum drive driven
pulley.
5. Install the woodruff key in the shaft and slide the driven pulley (item 8 in
Figure 54) onto the shaft. Secure the pulley with the hardened washer and
flange-head screw.
6. Install the drum drive belt to the machine; refer to
4–21).
7. Install the transmission drive belt and all the machine components removed
for the drum drive system service; refer to
4–38).
8. Connect the battery pack; refer to
(page 4–3).
Figure
Transmission Drive Belt (page
Connecting the Lithium Battery Pack
Page 4–55 Traction and Reel Drive System: Service and Repairs
54). If the fasteners were
Figure 54), spacer, and ball
Figure
Drum Drive Belt (page
54)