Table of Contents
Advertisement
Replacing basic chassis components
2. Place your fingertips in the depression on the side cover, and then, as you apply
3. Use both hands to lift the cover away from the chassis.
4. Set the cover aside.
Removing and replacing the upper fan holder foam
The interior of the server contains two layers of fan holder foam, which secure and stabilize
the cooling fans and add-in boards. The fan holder foam also maintains the space that is
required between the boards for cooling. You may be required to remove the upper fan holder
foam to access and work with some components.
Figure 12: Install fan holder foam
90
Avaya CallPilot® 703t Server Maintenance and Diagnostics
Use an ESD wrist strap to protect static-sensitive components.
pressure, pull the cover approximately 2.5 cm (1 in.) away from the front of the
server until it stops.
December 2010
Advertisement
Table of Contents
