The Nbtstat Command; Nbtstat Command Syntax - Avaya CallPilot 703t Maintenance And Diagnostics

The nbtstat command

The nbtstat command displays protocol statistics and current TCP/IP connections using NBT.

Nbtstat command syntax

The nbtstat command uses the following syntax:
nbtstat [-a remotename] [-A IP address] [-c] [-n] [-R] [-r] [-S] [-s]
[interval]
Table 9: Nbstat parameters
Parameter
-a remotename
-A IP address
-c
-n
-R
-r
-S
-s
interval
Avaya CallPilot® 703t Server Maintenance and Diagnostics
Lists the remote computer's name table using its name.
Lists the remote computer's name table using its IP address.
Lists the contents of the NetBIOS name cache giving the IP
address of each name.
Lists local NetBIOS names. Registered indicates that the name
is registered by broadcast (Bnode) or WINS (other node types).
Reloads the LMHOSTS file after purging all names from the
NetBIOS name cache.
Lists name resolution statistics for Windows networking name
resolution. On a Windows computer configured to use WINS,
this option returns the number of names resolved and registered
through broadcast or through WINS.
Displays both client and server sessions, listing the remote
hosts by IP address only.
Displays both client and server sessions, and attempts to
convert the remote host IP address to a name using the HOSTS
file.
Displays selected statistics, pausing interval seconds between
each display. Press Ctrl+C to stop displaying statistics. Without
this parameter, nbtstat prints the current configuration
information once.
Description
The nbtstat command
December 2010 45