Table of Contents
Advertisement
Troubleshooting your Avaya CallPilot® system
IF the system status LED
Tape drive LED states
The 703t server is equipped with an SLR60 tape drive. Three LEDs are located on the drive's
front panel. They are referred to as left, center, and right in the following table:
Table 2: SLR60 LEDs
Left -
Ready
Green
On
Blinking
Off
On
On
Off
On
24
Avaya CallPilot® 703t Server Maintenance and Diagnostics
AND
is
blinking
off
Center -
Right -
Activity
Error
Green
Amber
On
On
Off
Off
Off
Off
Off
Off
Blinking
Off
Off
On
Off
On
THEN
• a power fault has occurred.
• a fan is faulty.
• a non-critical temperature or voltage fault
has occurred.
a fatal error occurred during the power-on
status test (POST).
Description
LED test (2 seconds at power on) is running.
• Power-up self-test is running.
• Diagnostic cartridge activity is running.
• Cartridge is not inserted
• Tape is not loaded
• Cartridge is not inserted
• Tape is loaded but is not moving
• Tape is loaded and moving
• Tape is loading or unloading
• Cartridge is ejecting
• Cleaning is required
• Cartridge/tape is not loaded
• Cleaning is required
• Tape is loaded but not moving
December 2010
Advertisement
Table of Contents
