Table of Contents
Advertisement
Replacing media drives
Figure 19: SCSI and IDE drive cabling.
Replacing a faulty hard drive
If you need to replace a faulty hard drive, then do the following:
1. Review this entire section before proceeding to become familiar with the
2. Prepare the server for hard drive replacement as described in
3. Remove the faulty drive as described in
106
Avaya CallPilot® 703t Server Maintenance and Diagnostics
requirements and process.
for hardware maintenance
Important:
Due to the confined space for media drive cabling inside the server, hard drive
replacement is easiest when the server is laying on its side. Laying the server on
its side helps to prevent damage to the server and internal components.
page 109.
Important:
Replacement drives must be the same size or larger than the drives being
replaced.
on page 85.
To remove a hard drive from the server
Preparing the server
on
December 2010
Advertisement
Table of Contents
