To Remove Baseboard Dimms - Avaya CallPilot 703t Maintenance And Diagnostics

Working with DIMMs and the CPU
Figure 29: DIMM removal and installation
When installing DIMMs, ensure that the slots are populated in order, starting with the slot
closest to the power connector:
• DIMM 1A (This is the slot closest to the power connector.)
• DIMM 1B
• DIMM 2A
• DIMM 2B

To remove baseboard DIMMs

1. Prepare the server for DIMM replacement as follows:
148 Avaya CallPilot® 703t Server Maintenance and Diagnostics
a. Shut down the server, and then disconnect the power and peripheral
device cables.
b. Place the server on its side.
c. Remove the side cover.
For instructions, see Preparing the server for hardware maintenance on page 85.
December 2010