Table of Contents
Advertisement
Viewing the last diagnostic results
You can review the results of previously run diagnostics by clicking the Get Last Results button
for a component.
To view the last diagnostics result
Important:
Avaya recommends that you courtesy stop rather than stop a component if possible. For
instructions, see
1. Run CallPilot Manager and log in.
2. In CallPilot Manager, click Maintenance → Maintenance Admin.
3. Click the plus sign (+) beside the CallPilot server to expand the component tree.
4. Continue clicking the plus sign (+) until the component with which you want to work is
5. Click the hardware component for which you want to run diagnostics.
6. Scroll down to the Diagnostics section.
7. Check the check box for each diagnostic for which you want to review results.
8. Click Get Last Result.
Avaya CallPilot® 703t Server Maintenance and Diagnostics
Result: A new web browser window opens to display the progress and results of
the diagnostics. The Diagnostic Results box in the Diagnostics section displays
diagnostic results when you click Get Last Result.
Starting and stopping components
Result: The Maintenance screen appears.
visible.
Result: The Maintenance screen refreshes to show details about the component.
Result: The results appear in the Diagnostic Results box with the following
information:
• diagnostic title
• diagnostic result: pass or fail
• the date and time the test was completed
Viewing the last diagnostic results
on page 66.
December 2010
71
Advertisement
Table of Contents
