Avaya CallPilot 703t Maintenance And Diagnostics page 98

Replacing basic chassis components
Figure 16: Install front system fan
6. Insert the fan into its slot in the bottom fan holder foam.
7. Connect the fan's power cable as follows:
98 Avaya CallPilot® 703t Server Maintenance and Diagnostics
Important:
To ensure proper cooling operation, ensure that the printed label of the fan is
facing the back of the server, and the arrows embossed on the fan casing are
facing as follows:.
a. Insert the power cable of the fan into its slot on the bottom fan holder
foam, and route the cable as shown in the preceding diagram.
b. Connect the power cable of the fan to its connector on the motherboard.
The connector is keyed so that it can be attached only one way.
December 2010