Table of Contents
Advertisement
Busying Out the Data Link on a System 75 G1 or G3 Switch
Busying Out the Data Link on a G2 Switch
Removing the DEFINITY AUDIX Voice Ports
June 2002
To busy out the data link, perform the following tasks on the switch
administration terminal (SAT):
1. Enter busy link n
where n is the number of the link going to the INTUITY AUDIX
system. Valid input is an integer from 1 to 8.
For more information, see the DEFINITY switch documentation.
2. Continue with Removing the DEFINITY AUDIX Voice Ports
(page 9).
To busy out the data link, perform the following tasks on the switch
administration terminal (SAT):
1. Enter proc650 test 3
2. Enter the INTUITY AUDIX link number in field 6.
3. Enter bu bu
For more information, see the DEFINITY switch documentation.
4. Continue with Removing the DEFINITY AUDIX Voice Ports
(page 9).
Remove the DEFINITY AUDIX voice ports from the switch hunt group.
They will no longer be used. However, do not remove the hunt group.
For more information, see the administration documentation for the
DEFINITY AUDIX.
Return to the Migration Checklist (page 2).
585-313-118 Issue 4
Migrating from DEFINITY AUDIX
9
Advertisement
Table of Contents
