Chapter 9: Replacing media drives
In this chapter
SCSI and IDE drive cabling
Replacing a faulty hard drive
Replacing the tape drive
Replacing the CD-ROM drive
Replacing the floppy disk drive
SCSI and IDE drive cabling
Cabling diagram
Figure 19: SCSI and IDE drive cabling.
• cabling for and termination of SCSI devices (hard drives and tape drives)
• cabling for an IDE CD-ROM drive
Use the information in this section to assist you with the procedures for replacing a faulty hard
drive, tape drive, or CD-ROM drive
Avaya CallPilot® 703t Server Maintenance and Diagnostics
on page 105
on page 106
on page 113
on page 117
on page 119
on page 106 shows the following:
December 2010
105