Table of Contents
Advertisement
To remove the upper fan holder foam
Caution:
Risk of equipment damage
Use an ESD wrist strap to protect static-sensitive components.
1. Remove the server side cover.
2. Lift the upper fan holder foam out of the server.
To replace the upper fan holder foam
1. Ensure that the fan cables are in the slots in the lower fan holder foam.
2. Place the bottom end of the upper fan holder foam beneath the edge of the server
3. Align the slots on the underside of the foam with the fans and add-in boards.
4. Press the foam into place.
5. Ensure that the upper fan holder foam engages with the lip on the media drives
Replacing the side cover
After you complete your work with the interior components of the server, replace the side cover.
If you removed them, reinstall the chassis feet on the bottom of the server.
Avaya CallPilot® 703t Server Maintenance and Diagnostics
chassis.
Use your fingers on the underside of the upper fan holder foam to determine correct
placement of the fans. The fans must sit straight inside the foam sockets. They must
not align with the left side of the foam.
You may need to wiggle the fans so that the upper fan holder foam sits flush with
the bottom fan holder foam.
cage and is securely seated.
To remove the upper fan holder foam
December 2010
91
Advertisement
Table of Contents
