Table of Contents
Advertisement
703t description reference
Environmental condition
Operating shock
Handling drop
Slot assignments
The slot assignment tables show:
• the physical location of boards inside the server, relative to other boards
• the order in which boards are installed (for example, board #1, 2, 3, and so on)
• how the boards are represented in CallPilot Manager applications (that is, on the
Maintenance Administration page)
• the maximum capacity for each switch connectivity
Note:
Your server may vary depending on what was ordered from Avaya; therefore, your server
may not have all of the slots populated.
Slot definition and numbering
In
Table 26: Slot definition and numbering
slot openings in the chassis, not the PCI connectors inside the server.
The slots are numbered from the bottom of the server to the top. Slot 1 is the bottom slot in
the chassis when the chassis is standing upright.
Table 26: Slot definition and numbering
Slot number
PCI slot 7 (full length)
PCI slot 6 (full length)
PCI slot 5 (full length)
PCI slot 4 (full length)
176
Avaya CallPilot® 703t Server Maintenance and Diagnostics
No errors with a half sine wave shock of 2G
(with 1 millisecond duration)
Operational after a free fall from 450 mm to
600 mm (18 in. to 24 in.) (depending on
weight)
on page 176, the term "slot" refers to the available
CallPilot-assigned
a
board label
Not used
BRD06
BRD05
BRD04
Specification
Meridian 1 or Communication
Server 1000
Not used
RAID card
Not used
MPB96 board
December 2010
Advertisement
Table of Contents
