Table of Contents
Advertisement
Working with the Avaya CallPilot® server BIOS
Updating and configuring the BIOS
BIOS update availability
Important:
The BIOS installed on the Avaya CallPilot server must be version P07 Build 64 or P16 Build
75. The BIOS versions cannot be updated, nor can P07 Build 64 be updated to P16 Build
75. A BIOS update can cause your system to crash.
To configure the BIOS
Note:
Only options that need to be changed from their defaults are described below. As you
perform this procedure, you should still validate that all BIOS settings conform to the values
listed in
1. During the server startup and while the startup diagnostics still appear on the
2. Press BIOS Default (F9) to load the default BIOS settings.
3. Choose Yes, and then press Enter.
4. Use the right and left arrow keys to choose the Advanced screen.
5. Configure the sections as follows:
6. Use the right and left arrow keys to choose the Server screen.
166
Avaya CallPilot® 703t Server Maintenance and Diagnostics
BIOS settings
on page 162.
screen, press F2 to display the Main menu screen.
Result: You are prompted to confirm the settings.
Result: The Main menu reappears.
Result: A list of configuration sections appears.
• Boot-up Diag Screen: Enabled
• Num Lock: ON
• Sleep Button: Disabled
Result: A list of configuration sections appears.
December 2010
Advertisement
Table of Contents
