Using Windows online diagnostic tools
The ipconfig command
The ipconfig command displays IP configuration information.
Ipconfig default
If you run the command without flags, it displays the IP address, subnet mask, and default
gateway for each adapter bound to TCP/IP.
Ipconfig command syntax
ipconfig /[ ]
The following flags are available for the ipconfig command:
/?
/all
/release
/renew
To run the ipconfig command from Windows
1. Click Start → Programs → Accessories → Command Prompt.
2. At the Command prompt, type ipconfig <with appropriate parameters>.
3. Press Enter.
4. Type Exit to exit the Command Prompt window and return to Windows.
40
Avaya CallPilot® 703t Server Maintenance and Diagnostics
Flag
Displays Help information.
Displays full configuration information.
Releases the IP address for the specified adapter.
Renews the IP address for the specified adapter.
Result: The Command Prompt window appears.
Example: ipconfig /all
Result: The system runs the ipconfig utility.
Description
December 2010