Replacing memory modules
Sequence for populating DIMM connectors
To optimize system performance, install dual in-line memory modules (DIMMs) in the sequence
that is shown in the following table.
Installed microprocessors
Microprocessor 1
Microprocessor 2
Note:
The server for Communication Manager 5.2.1 has only one microprocessor installed.
Note:
Dual microprocessors require equal distribution of DIMMs between the processors. For
example, a 12GB DIMM would have connectors 3,6,8 and 11,14,16 populated.
The following figure shows the numbering sequence of the DIMMs.
Maintaining the Avaya S8800 Server for Avaya Aura
DIMM connector population sequence
3, 6, 8, 2, 5, 7, 1, 4
11, 14, 16, 10, 13, 15, 9, 12
®
Communication Manager
Replace the hardware components
July 2012
21