Verifying Consistency On The Drives - Avaya CallPilot 703t Maintenance And Diagnostics

3. Exit the utility and reboot the server.
4. Set the server to boot from CD.
5. Insert the RAID Update Utility CD and reboot the server.
6. Select Update LSI320-2 Firmware.
7. Answer Y to both questions.
8. Allow the system to reboot to Windows 2003.
9. Insert the RAID Update Utility CD and unzip the RAIDUP.EXE file.
10. Locate SCSI controllers → LSI Adapter in the RAIDUP directory. Double click on it,
11. Point to the c:\raidup\Win2k3 folder.
12. The system asks you to reboot.
13. Check the driver, firmware and Power Console configuration.
14. Right click on C:\WINNT\SYSTEM32\DRIVERS\mraid3xx.sys and select

Verifying consistency on the drives

This optional consistency check on the logical drive of the RAID system ensures that the data
on the drives is identical. If any errors are found, they are corrected automatically. Perform a
consistency check before you split the RAID system pack. A good data backup on an offline
Avaya CallPilot® 703t Server Maintenance and Diagnostics
c. Select Objects → Channel and ensure channel speed is 160M. ((Default
for LSI320 is 320M).
d. Repeat for all channels.
Result: The DOS boot menu appears.
Result: The system will prompt twice to confirm you are upgrading the firmware.
Result:The system upgrades the firmware and asks you to reboot.
Result: A directory called RAIDUP is created on C:\ drive
then select Driver.
Result: You are asked to choose the Upgrade Driver.
Result: The system reboots to Windows 2003.
a. Open the MegaRAID Power Console from the Start → Programs menu.
b. Select Help About from the menu and verify the MegaRAID Power
Console version is 5.00i.
c. Select Adapter → Properties and verify the firmware version is 1L37 and
the board type is LSI320-2.
d. Exit the Power Console.
Properties → Version. Verify the Driver version is 6.45.
Verifying consistency on the drives
December 2010 131