Table of Contents
Advertisement
The ping command
The ping command sends an echo request to a specified host. Use this command to verify
network connectivity to the remote device.
Ping command syntax
The ping command uses the following syntax:
ping [-t] [-a] [-n count] [-l size] [-f] [-i TTL] [-v TOS] [-r count]
[-s count] [[-j host-list] | [-k host-list]] [-w timeout]
destination-list
Table 6: Ping command parameters
Parameter
-t
-a
-n count
-l size
-f
-i TTL
-v TOS
-r count
-s count
-j host-list
-k host-list
-w timeout
To run the ping command from Windows
1. Click Start → Programs → Accessories → Command Prompt.
Avaya CallPilot® 703t Server Maintenance and Diagnostics
Pings the specified host until interrupted.
Resolves addresses to host names.
Specifies the number of echo requests to send.
Sends buffer size.
Sets Don't Fragment flag in packet.
Sets Time-To-Live
Sets Type Of Service
Records route for count hops
Shows time stamp for count hops
Shows loose source route along host list
Shows strict source route along host list
Sets time-out in milliseconds to wait for each reply
Description
The ping command
December 2010
41
Advertisement
Table of Contents
