Net Start Command; To Invoke The Net Start Command From Windows - Avaya CallPilot 703t Maintenance And Diagnostics

Net Start command

Use the Net Start command to restart a specified service on a serial port. The syntax for the
Net Start command is as follows:
net start "[service-name]"

To invoke the Net Start command from Windows

1. Click Start → Programs → Accessories → Command Prompt.
2. At the Command prompt, type net start "service_name", and then press Enter.
3. Type Exit, and then press Enter to exit the Command Prompt window.
Avaya CallPilot® 703t Server Maintenance and Diagnostics
Result: The Command Prompt window appears.
Note:
The quotation marks are required, as in the example above.
Net Start command
December 2010 55