Using serial port diagnostic tools
9-pin connector plug
The standard serial loopback connector is a female 9-pin D-sub connector. This connector has
the following pins wired together:
• CTS (pin 8) wired to (pin 7) RTS
• SIN (pin 2) wired to (pin 3) SOUT
• DTR (pin 4) wired to (pin 6) DSR
Once the plug is installed on the serial port, TSTSERIO can be invoked according to the
invoke the TSTSERIO /P command from Windows
Restarting services
This section describes how to restart the services for COM 1 or COM 2 after invoking the
TSTSERIO local loopback tests.
Service to restart after COM 1 testing
Services to restart after COM 2 testing
• CallPilot SLEE Service
• CallPilot MWI Service
• CallPilot Access Protocol Emulator
• CallPilot Blue Call Router
• CallPilot Call Channel Router
• CallPilot Time Service
• Routing and Remote Access
54
Avaya CallPilot® 703t Server Maintenance and Diagnostics
on page 52.
To
December 2010