Power/Sleep Led States; System Status Led - Avaya CallPilot 703t Maintenance And Diagnostics

Power/sleep LED states

The power/sleep LED is the middle LED in the row of LEDs below the power button on the
703t server's front panel (see "Status LEDs" in the diagram on
LED is green.
IF the power/sleep status
green
off
Note:
The Avaya CallPilot operating system does not support sleep mode on the server.

System status LED

The system status LED is the right LED in the row of LEDs below the power button on the 703t
server's front panel (see "Status LEDs" in the diagram on
Note:
If the status LED indicates a problem, you can learn more about the problem by using the
server's event log. For more information, see
IF the system status LED
green
amber
Avaya CallPilot® 703t Server Maintenance and Diagnostics
LED is
steady
not applicable
AND
is
steady
blinking
steady
AND
the server is powered on.
the server is powered off.
LED locations
Viewing event logs
THEN
the server is operating normally.
the server's processor or memory is
disabled.
• a critical temperature or voltage fault has
occurred.
• the CPU is not installed or is not
functioning.
Power/sleep LED states
LED locations on page 20). The
THEN
on page 20).
on page 36.
December 2010 23