ip access-list standard
IP address.
ip access-list extended
addresses or protocols.
enable password
Change the password for the enable command.
C9000 Series
Syntax
enable password [level level] [encryption-type] password
To delete a password, use the no enable password [encryption-type]
password [level level] command.
Parameters
level level
encryption-type
password
Defaults
No password is configured. level = 15.
Command Modes
CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Neworking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
— names (or selects) a standard access list to filter based on the
— names (or selects) an extended access list based on the IP
(OPTIONAL) Enter the keyword level then a number as the
level of access. The range is from 1 to 15.
(OPTIONAL) Enter the number 7 or 0 as the encryption type.
Enter a 7 then a text string as the hidden password. The text
string must be a password that was already encrypted by a Dell
Networking router.
Use this parameter only with a password that you copied from
the show running-config file of another Dell Networking
router.
Enter a text string, up to 32 characters long, as the clear text
password.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Security
1935