Set - Dell C9000 Series Reference Manual

Version
7.5.1.0
6.1.1.1
Usage Information This command assigns a class map or QoS policy to different queues. There are eight
queues per interface on the Z9500.
Related
Commands

set

Mark outgoing traffic with a differentiated service code point (DSCP) or dot1p value.
C9000 Series
Syntax
set {ip-dscp value | mac-dot1p value}
Parameters
ip-dscp value
mac-dot1p value
Defaults none
Command Modes CONFIGURATION (conf-qos-policy-in)
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
Description
Introduced on the C-Series.
Introduced on the E-Series.
• class-map— identifies the class map.
• service-policy input— applies an input policy map to the selected interface.
• service-policy output— applies an output policy map to the selected interface.
(OPTIONAL) Enter the keywords ip-dscp then the IP DSCP
value. The range is from 0 to 63.
Enter the keywords mac-dot1p then the dot1p value. The range
is from 0 to 7.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added mac-dot1p on the C-Series and S-Series.
Quality of Service (QoS) 1826