Dell C9000 Series Reference Manual page 1988

Defaults
The default list of MAC algorithm is in the order as shown below:
When FIPS mode is enabled:
•
•
•
When FIPS mode is disabled:
•
•
•
•
•
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version
9.10(0.0)
Usage Information
•
•
•
•
When FIPS mode is enabled:
•
hmac-sha2–256
•
hmac-sha1
•
hmac-sha1–96
When FIPS mode is disabled:
•
hmac-sha2-256
•
hmac-sha1
•
hmac-sha1–96
•
hmac-md5
•
hmac-md5-96
hmac-sha2–256
hmac-sha1
hmac-sha1–96
hmac-sha2-256
hmac-sha1
hmac-sha1–96
hmac-md5
hmac-md5-96
Description
Introduced on the S6100–ON, S6000, S6000–ON, S5000,
S4810, S4820T, S3048–ON, S4048–ON, MXL, C9010, S3100
series, and Z9100-ON.
You can select one or more MAC algorithms from the list.
Client-supported MAC list gets preference over the server-supported MAC list in
selecting the MAC algorithm for the SSH session.
When the MAC (-m) option is used with the SSH CLI, it overrides the configured
or default MAC list.
When FIPS is enabled or disabled, the client MACs get default configuration.
Security 1988