Dell C9000 Series Reference Manual page 1955

Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.4.1.0
8.3.7.0
7.7.1.0
7.6.1.0
7.5.1.0
6.2.1.0
Usage Information To configure any number of RADIUS server hosts for each server host that is
configured, use this command. The system searches for the RADIUS hosts in the order
they are configured in the software.
The global default values for the timeout, retransmit, and key optional parameters
are applied, unless those values are specified in the radius-server host or other
commands. To return to the global default values, if you configure the timeout,
retransmit, or key values, include those keywords when using the no radius-
server host command syntax.
Related
login authentication
Commands
radius-server key
radius-server retransmit
send information.
radius-server timeout
Configure this parameter last because leading spaces are
ignored.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Added support for IPv6.
Introduced on the S4810.
Authentication key length increased to 42 characters.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— sets the database to be checked when a user logs in.
— sets an authentication key for RADIUS communications.
— sets the number of times the RADIUS server attempts to
— sets the time interval before the RADIUS server times out.
Security 1955