Distribute-List Out - Dell C9000 Series Reference Manual

Version
8.3.7.0
7.8.1.0
7.6.1.0
6.2.1.1
Related ip prefix-list
Commands

distribute-list out

Configure a filter for outgoing routing updates.
C9000 Series
Syntax
distribute-list prefix-list-name out [interface | bgp | connected
| ospf | static]
To delete the filter, use the no distribute-list prefix-list-name out
command.
Parameters
prefix-list-name
interface
connected
ospf
static
Defaults Not configured.
Description
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— enters PREFIX-LIST mode and configures a prefix list.
Enter the name of a configured prefix list.
(OPTIONAL) Identifies the interface type slot/port as one of the
following:
• For a Port Channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a VLAN, enter the keyword vlan then a number from 1
to 4094.
(OPTIONAL) Enter the keyword connected to filter only directly
connected routes.
(OPTIONAL) Enter the keyword ospf to filter all OSPF routes.
(OPTIONAL) Enter the keyword static to filter manually
configured routes.
Routing Information Protocol (RIP) 1891