Neighbor Description - Dell C9000 Series Reference Manual

Command History
Version
9.9(0.0)
9.2(1.0)
8.2.1.0
7.4.1.0
Usage Information If you apply a route map to a BGP peer or neighbor with the neighbor default-
originate command configured, the software does not apply the set filters in the
route map to that BGP peer or neighbor.

neighbor description

Assign a character string describing the neighbor or group of neighbors (peer group).
C9000 Series
Syntax
neighbor {ipv6-address | peer-group-name} description text
To delete a description, use the no neighbor {ipv6-address | peer-group-
name} description text command.
Parameters
ipv6-address
peer-group-name
text
Defaults Not configured.
Command Modes ROUTER BGP
Command History
Version
9.9(0.0)
9.2(1.0)
8.2.1.0
7.4.1.0
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
Enter the name of the peer group to set the advertisement
interval for all routers in the peer group.
Enter a continuous text string up to 80 characters.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
Border Gateway Protocol 600