Show Diag - Dell C9000 Series Reference Manual

show diag

Display results of offline diagnostic tests on a switch.
C9000 Series
Syntax
show diag {cp unit-id [detail | summary]| pe pe-id stack-unit
unit-number}|information | linecard slot-id [detail | summary]|
testcase {cp | pepe-id | linecard slot-id} }
From a PE console, use show diag testcase stack-unit unit number
[detail | summary]
Parameters
cp unit-id
pe pe-id
stack-unit unit-
number
information
linecard slot-id
summary
detail
testcase
Defaults View a summary of the offline diagnostic test results that ran on all CPUs (Control
Processor, Route Processor, line cards, and Port Extenders).
Command Modes EXEC Privilege
Enter the cp unit-id parameters to display the results only of
the offline diagnostic tests run on the Control Processor CPU.
The Control Processor CPU ID is 0.
Enter the pe pe-id parameters to display the results only of the
offline diagnostic tests run on the Port Extender (PE). The PE ID
range is from 0 to 255.
NOTE: The pe option is only available when the feature
extended bridge is enabled.
Enter the stack—unit unit-number parameters to display the
offline diagnostic test results of a specified stack-unit.
Enter the keyword information to view the current diag
information in the system.
Enter the linecard slot-id parameters to display the results
only of the offline diagnostic test run on a specified line card. he
range of line-card CPU IDs is from 0 to 11. Each line-card CPU
processes packets on the corresponding switch line card; for
example, line-card CPU 1 processes packets on line card 1.
Enter the keyword summary to display a summary of the offline
diagnostic test results.
Enter the keyword detail to display detailed information about
the offline diagnostic test results.
Enter the keyword testcase to display the diag testcases
available for CP, PE, or the Linecard.
Debugging and Diagnostics 748