Neighbor Allowas-In - Dell C9000 Series Reference Manual

To return to the default value, use the no neighbor {ipv6-address | peer-
group-name} advertisement-interval command.
Parameters
ipv6-address
peer-group-name
seconds
Defaults
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version
9.9(0.0)
9.2(1.0)
8.2.1.0
7.4.1.0

neighbor allowas-in

Set the number of times an AS number can occur in the AS path.
C9000 Series
Syntax
neighbor {ip-address | peer-group-name} allowas-in number
To return to the default value, use the no neighbor {ip-address | peer-group-
name} allowas-in command.
Parameters
ipv6-address
Enter the IPv6 address in the x:x:x:x::x format.
Enter the name of the peer group to set the advertisement
interval for all routers in the peer group.
Enter a number as the time interval, in seconds, between BGP
advertisements. The range is 0 to 600 seconds. The default is 5
seconds for internal BGP peers and 30 seconds for external BGP
peers.
• seconds = 5 seconds (internal peers)
• seconds = 30 seconds (external peers)
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
Border Gateway Protocol 598