Show Ipv6 Protocol-Queue-Mapping - Dell C9000 Series Reference Manual

Networking command-line reference guide

Hide thumbs Also See for C9000 Series:

Table of Contents

TCP (TELNET)

show ipv6 protocol-queue-mapping

Display the CPU queue mapping for IPv6 protocols.

C9000 Series

show ipv6 protocol-queue-mapping

Not configured.

Command Modes

EXEC Privilege

Usage Information The show output displays information CPU traffic flows for supported IPv6 protocols,

including the ingress queue at which the traffic is queued and the CPU to which

protocol traffic is sent with the applied rate limits (configured or default) in kilobits per

second (kbps). The egress port queues on CPUs are abbreviated as: RP (Route

Processor), CP (Control Processor), and LC (line card).

Command History

This guide is platform-specific. For command information about other platforms, refer

to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Introduced on the C9010.

Introduced on the Z9500.

Introduced on the Z9000.

Introduced on the S4820T.

Control Plane Policing (CoPP)

Table of Contents