Neighbor X:x:x::x Password; Network - Dell C9000 Series Reference Manual

Usage Information In the software's best path selection process, the path with the highest weight value is
preferred.

neighbor X:X:X::X password

Enable TCP MD5 Authentication for an IPv6 BGP peer session.
C9000 Series
Syntax
neighbor x:x:x::x password {7 <encrypt-pass>|<clear-pass>
To return to the default setting, use the no neighbor x:x:x::x password
command.
Parameters
encrypt-pass
clear-pass
Defaults Disabled.
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version
9.9(0.0)
9.2(1.0)
8.2.1.0
Usage Information The TCP session is authentication and hence prevents the data from being
compromised.

network

Specify the networks for the BGP process and enter them in the BGP routing table.
C9000 Series
Syntax
network ipv6-address prefix-length [route-map map-name]
To remove a network, use the no network ip-address mask [route-map map-
name] command.
NOTE: Reset the neighbor connection (the clear ip bgp * command) to
apply the weight to the connection and recompute the best path.
Enter the encrypted password.
Enter the clear text password.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced
Border Gateway Protocol 619