Default-Metric; Description - Dell C9000 Series Reference Manual

default-metric

Allows you to change the metrics of redistributed routes to locally originated routes. Use this command with
the redistribute command.
C9000 Series
Syntax
default-metric number
To return to the default setting, use the no default-metric command.
Parameters
number
Defaults 0
Command Modes ROUTER BGP
Command History
Version
9.9(0.0)
9.2(1.0)
8.2.1.0
7.4.1.0
Usage Information The default-metric command in BGP sets the value of the BGP MULTI_EXIT_DISC
(MED) attribute for redistributed routes only.
Related
Commands

description

Enter a description of the BGP routing protocol.
C9000 Series
Syntax
description {description}
To remove the description, use the no description {description} command.
Enter a number as the metric to be assigned to routes from
other protocols. The range is 1 to 4294967295.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
• bgp always-compare-med
• redistribute – redistributes routes from other routing protocols into BGP.
– enables comparison of all BGP MED attributes.
Border Gateway Protocol 593