Remote-Exec - Dell C9000 Series Reference Manual

Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.0
8.3.7.0
7.8.1.0
Related show hardware
Commands statistics for a specified hardware component.

remote-exec

Debug and troubleshoot switch hardware using remote commands.
WARNING: Use the remote-exec command only with the guidance of an engineer from Dell
Networking Technical Support.
C9000 Series
Syntax
remote-exec {cp | rp | linecard slot-id} hw-command
Parameters
cp
rp
linecard slot-id
hw-command
Defaults none
Command Modes
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
— displays the data plane or management plane input and output
Enter the keyword cp to troubleshoot Control Processor CPU
operation.
Enter the keyword rp to troubleshoot Route Processor CPU
operation.
Enter the linecard slot-id to troubleshoot line-card CPU
operation. The range of line-card slot IDs is from 0 to 11. Each
line-card CPU processes packets on the corresponding line card
on your switch.
Enter the debug command that Dell Networking Technical
Support gives you.
• EXEC
Debugging and Diagnostics 768