View The System Cpu Status - NETGEAR XS708T User Manual

XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
The default password is password.
The System Information page displays.
5. Scroll down to the Versions section.
6. To refresh the page, click the Update button.
The following table describes the nonconfigurable information displayed in the Versions
section of the System Information page.
Table 8. Versions information
Field
Model Name
Boot Version
Software Version

View the System CPU Status

Use the System CPU Status page to monitor the CPU, memory resources, and utilization
patterns across various intervals to assess the performance, load, and stability parameters of
member units.

To view the system CPU status:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 10.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select System > Management > System CPU Status > System CPU Status.
Description
The model name of the switch.
The version of the bootloader software of the switch.
The version number of the code currently running on the switch.
Configure System Information
35
Change the Default IP Address of the