Configure Ipv6 Acl - NETGEAR XS708T User Manual

XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual

Configure IPv6 ACL

An IP or IPv6 ACL consists of a set of rules that are matched sequentially against a packet.
When a packet meets the match criteria of a rule, the specified rule action (Permit or Deny) is
taken, and the additional rules are not checked for a match. On this page the interfaces to
which an IP ACL applies must be specified, as well as whether it applies to inbound or
outbound traffic. You can create rules for the IPv6 ACL on the IPv6 Rules page.
Add an IPv6 ACL

To add an IPv6 ACL:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 10.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security > ACL > Advanced > IPv6 ACL.
6. In the IPv6 ACL field, specify a name to identify the IPv6 ACL.
This is the IPv6 ACL name string, which includes up to 31 alphanumeric characters only.
The name must start with an alphabetic character.
7. Click the Add button.
The IPv6 ACL is added.
Change the Default IP Address of the
Manage Device Security
343