Configure Router Discovery For A Vlan Routing Interface - NETGEAR GS108Tv3 User Manual

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Configure router discovery for a VLAN
routing interface
By default, a VLAN routing interface does not send router advertisements.You can enable the
router advertisements for a VLAN routing interface and configure the setting for the router
advertisements.
To configure router discovery for a VLAN routing interface:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the switch on-network and
connected to the Internet on page 19 or Access the switch off-network on page 30.
The login page displays.
If the NETGEAR Business page displays, see Register and access the switch with your
NETGEAR account on page 34.
4. Enter one of the following passwords:
• After registration, enter the local device password.
By default, the local device password is password.
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see Credentials for the local browser interface on
page 32.
5. Click the Login button.
The System Information page displays.
6. Select Routing> Router Discovery > Router Discovery Configuration.
7. Select the check box for the VLAN routing interface.
8. From the Advertise Mode menu, select Enable or Disable.
Configure Routing
Cloud Management
248 User Manual