Lldp-Med Neighbors Information - NETGEAR S3300 User Manual

Figure 59. LLDP-MED Port Settings
2. From the Port list, select the port to configure.
3. Use the lists to enable or disable the following LLDP-MED settings for the selected port:
• LLDP-MED Status. The administrative status of LLDP-MED on the interface. When
LLDP-MED is enabled, the transmit and receive function of LLDP is effectively
enabled on the interface.
• Notification. When enabled, the port sends a topology change notification if a device
is connected or removed.
• Transmit Optional TLVs. When enabled, the port transmits the following optional
type length values (TLVs) in the LLDP PDU frames:
- MED Capabilities
- Network Policy
- Location Identification
- Extended Power via MDI: PSE
- Extended Power via MDI: PD
- Inventory
4. Click the Apply button.

LLDP-MED Neighbors Information

Use this screen to display the LLDP-MED Neighbors/Remote Device information.

To display the LLDP-MED Neighbors Information:
1. Select System > LLDP > Advanced > LLDP-MED Neighbors Information.
S3300 Smart Managed Pro Switch
Configure System Information
103