Configure Igmp Snooping For Interfaces - NETGEAR S350 Series User Manual

S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch Models GS308T and GS310TP
9. To refresh the page with the latest information about the switch, click the Update button.
The following table displays information about the global IGMP snooping status and statistics
on the page.
Table 36. IGMP Snooping Configuration information
Field
Multicast Control Frame Count
Interfaces Enabled for IGMP
Snooping
VLAN IDs Enabled For IGMP
Snooping
VLAN IDs Enabled For IGMP
Snooping Querier

Configure IGMP Snooping for Interfaces


To configure IGMP snooping for interfaces:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 11.
Your web browser might display a security message, which you can ignore. For more
information, see
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Switching> Multicast > IGMP Snooping > Interface Configuration.
Description
The number of multicast control frames that are processed by the CPU.
The interfaces that are enabled for IGMP snooping.
The IDs of the VLANs that are enabled for IGMP snooping.
The IDs of the VLANs that are enabled for IGMP snooping querier.
Access the Local Browser Interface
Configure Switching
Change the Default IP Address of the
on page 19.
152