14.2 Checking and Adjusting Image Data Writing Position
If the image data writing position deviates, you can adjust in the "PRODUCT SETUP" window of DRYPRO 832
Utility Tool.
Be sure to check and adjust the image data writing position after performing the following tasks:
Caution
14.2.1 Checking Image Data Writing Position
Check the image data for deviation by printing the frame pattern and measuring the difference between the
unexposed portions on both edges of the film.
1
Start DRYPRO 832 Utility Tool with reference to
The Maintenance Menu window appears.
2
Click the [TEST PRINT] button under "PRINT INFO.".
The "TEST PRINT" window appears.
3
Select "FRAME" from "PRINT TYPE".
The "FRAME" pallet appears.
4
Select the tray from which you want to print the frame pattern from the "TRAY SELECT" drop-
down list and specify "DENSITY" and "COPY COUNT".
5
Click the [PRINT] button.
The FRAME pattern is printed from the selected tray.
•
When the exposure unit was replaced
•
When the sub scan unit V-Sync sensor was replaced
Chapter 14 Setting and Adjustment
"15.1 DRYPRO 832 Utility Tool Start (Page 15-2)"
.
14-13