Konica Minolta drypro 832 Service Manual page 36

Chapter 3 Basic Operations
Cover Installation Procedure
3-8
1
Install the lower right cover.
• Four screws (M4×8)
Slide the lower right cover upward so that the tabs (two
locations) on the lower right cover hook onto the main unit
to install the cover.
2
Open the front cover.
The front cover will open by pulling its upper part on both
sides.
Do not push down or place objects on the
opened front cover. Failure to observe this
Caution
caution can cause the breakdown.
3
Open the right cover by rotating the lever B in the
direction of an arrow.
4
Install the right cover.
Hook the tabs (four locations) on the inside of the right cover
onto the external guide assembly, and slide the right cover
downward to install.