Konica Minolta drypro 832 Service Manual page 361

The confirmation window appears.
8
Check the device and file to restore again and click the [OK] button if everything is OK.
Click the [OK] button and verify the source file and the selected device again by checking the
serial number and IP address of the destination device of restored data before performing a
Caution
restore.
Error dialog may be displayed when the [OK] button is clicked in above diagram.
Caution
If the backup file for DRYPRO 832 is not valid
Check the serial number of the target file, and repeat from
Connection error with DRYPRO 832
Check the network connection status between the server PC and the DRYPRO 832.
Refer to the installation manual regarding network connection.
Network error on server PC
Check if the network cable is connected to the server PC.
Refer to the installation manual regarding network connection.
Chapter 16 MainteTool
step 5.
16-31